Lexmark C752 Service Manual page 65

User primary User secondary
message message
30 Yellow Toner
Cart Missing
30 Magenta Toner
Cart Missing
30 Cyan Toner
Cart Missing
30 Black Toner
Cart Missing
31 Defective
Black Cartridge
31 Defective
Yellow Cartridge
31 Defective
Magenta Cartridge
31 Defective
Cyan Cartridge
32 Unsupported
33 Calibration
Error Cyan
33 Calibration
Error Magenta
33 Calibration
Error Yellow
33 Calibration
Error Black
34 Incorrect Change <source>
Media <type><size>
Explanation
This message is displayed when the printer is missing the
yellow, magenta, cyan, or black toner cartridge. Open the
front cover, insert the toner cartridge, and close the cover.
Note: Verify that cartridge packing material is removed.
This message is displayed when the front cover is closed
and a defective print cartridge is detected. It may take the
printer 10 to 20 seconds to determine whether or not the
print cartridge is installed. The printer may print pages
during this 10 to 20 second interval. If pages are allowed to
print, then they will not be reprinted once a valid print
cartridge is inserted. Replace the defective print cartridge.
The defective cartridge can be removed while the message
is displayed.
This message is displayed when the front cover is closed
with the wrong print cartridge installed.
This message is displayed when the printer detects a
calibration error for a particular color.
When this message is displayed you can press Go to clear
the message and continue processing the job. The cartridge
state is updated in the supplies menu.
This message is displayed when the printer detects a media
mismatch.
Primary Message: 34 Incorrect Media.
Secondary Message: <type>= Bond, Cardstock, Colored,
Labels, Envelopes, Letterhead, Plain, Preprint,
Transparency or Glossy. <size>= Letter, Legal, B5, A4,
Exec, Univ, A5, A3, 11x17, Folio or Stmt, 73/4, 9, 10, DL,
C5, B5 or other.
The following actions can be taken:
• Replace the media in the source with the requested
media and press Go
or
• Press Menu to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting
Menu:
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
Note: If message persists, go to
page 3-30 and check operation of inline media sensor.
5060-2XX
"Base Sensor Test" on
2-31
Diagnostic information