Paper Size Sensing Board - Lexmark C752 Service Manual

3.
Gently wiggle the entire assembly and press in and around the corner to the right.
4.
Grasp the rectangular piece (B) of the paper size sensing assembly and move up and to the left until the
screw hole (C) lines up.

Paper size sensing board

Warning: Whenever the paper size sensing board is removed, customer settings in the NVRAM may be lost.
The"Motor Detect" on page 3-17
replacement of a paper size sensing board
1.
Print the Quality Test Pages. See
Save the margin settings so they can be reentered after replacing the board.
2.
Remove the
3.
Disconnect the cables.
4.
Remove the paper size sensing board screws (A).
5.
Remove the board.
"Prt Quality Pgs" on page
"Rear cover" on page 4-9.
must be performed if the NVRAM contents are lost during the
3-9.
A
5060-2XX
4-53
Repair information