Paper Jam - Lexmark C752 Service Manual

5060-2XX
Step Action and questions
5 Check the vacuum transport belts (VTB) for motion.
Observe the belt through the front door.
Are the belts on the VTB assembly turning?
6 Check the VTBs for wear or damage.
Are the belts worn or damaged?
7 Check the VTB plate for a buildup of debris.
Is there a debris buildup?
8 Does media move smoothly into the fuser from the
VTB?

202 Paper Jam

Step Action and questions
1 Remove the fuser from the printer. Remove the oiler
housing from the fuser, and pivot the paper guide up.
Is media jammed inside the fuser?
2 Check fuser exit sensor flag.
Does flag rotate freely and return to normal position
when released?
3 Check that the diverter gates in the fuser rotate freely.
Do the diverter gates rotate freely?
2-70
Service Manual
Yes No
Go to step 6 Go to
transport belt
(VTB)" on
page 4-71
verify correct
installation.
Replace the Go to step 7.
"Vacuum
transport belt
(VTB)" on
page 4-71.
Clean off the VTB Go to step 8
plate.
Call the next level Replace the
of support. "Vacuum
transport belt
(VTB) fan" on
page
Yes No
Clear the jam Go to step 2
from the fuser.
Go to step 4 Replace the
"Fuser
assembly" on
page
Go to step 4 Replace the
"Fuser
assembly" on
page
"Vacuum
to
4-73.
4-32.
4-32.