Lexmark C752 Service Manual page 64

5060-2XX
User primary
message
Install Tray x or
Cancel Job
Install Bin x or
Cancel Job
Install Duplex or
Cancel Job
No DRAM Installed
30 ITU Missing
2-30
Service Manual
User secondary
Explanation
message
This message is displayed when the printer requests the
user to insert tray x before it can continue printing the job.
The printer needs to pick media from the missing tray or the
trays below it.
Tray=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5
Note: This message displays when refilling the trays during
a job. Before filling tray x take the printer offline by pressing
Stop and wait for pages to reach the output bin.
The following actions can be taken:
• Insert the requested tray
• Press Menu to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting
Menu:
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
This message is displayed when the user has Hot
Unplugged a paper handling option and the printer requires
the reinstallation of the option to print a page which has
been formatted by an install Tray x interpreter prior to
removal of the option or Cancel Job:
• Bin x (x=1,2 or 3)
• Tray x (x=2,3,4 or 5)
• Duplex
The following actions can be taken:
• Insert the requested option
• Press Menu to access the Busy/Waiting Menu Group.
The following functions are available using the Busy/Waiting
Menu:
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
This message is displayed when the printer is turned on and
no DRAM is detected.
This message is displayed when the ITU is missing.
Turn the printer off, insert the ITU, and turn the printer back
on.
Note: If the ITU is present, reset the ITU handle from the
3 o'clock to the 6 o'clock position.
or
or