5060-2XX
Cartridge contact assembly
Go to
"Cartridge contact assembly" on page 7-28
Warning: Do not remove printheads.
1.
Open the front cover.
2.
Remove the toner cartridges.
3.
Remove the
4.
Remove the
5.
Remove the
6.
Remove the cartridge rail front and rear mounting screws and remove the rail of selected cartridge
assembly.
7.
Press the cartridge contact assembly (yellow shown) retaining tabs (A) and remove the assembly.
8.
Remove the screw (B) from the front of the printhead.
9.
Remove the screws for the contact assembly you are removing.
4-28
Service Manual
"ITU assembly" on page
"Top cover assembly" on page
"Developer HVPS board" on page
for part numbers.
4-40.
4-6.
4-30.