Redrive Assembly Removal - Lexmark B2650 Service Manual

6
Remove the two screws (A), and then remove the plate.
7
Remove the sensor.

Redrive assembly removal

1
Remove the right cover. See
2
Remove the left cover. See
3
Remove the rear cover. See
4
Remove the top cover. See
5
Disconnect the cables JNRW1 and JFUTHM1 from the controller board.
6
Remove the four screws (A) and the cable (B).
7
Remove the redrive assembly.
"Right cover removal" on page
"Left cover removal" on page
"Rear door and cover removal" on page
"Top cover removal" on page
Parts removal
236
186.
177.
234.
238.
A
B
4600-830, -835, -895
A