5060-2XX
Finisher Tests
Staple Test
This test verifies the operation of the staple mechanism in the finisher.
To run the Staple Test, select Staple Test from the test menu. The printer feeds eight pieces of media to the
finisher and accumulates all eight pieces in the accumulator. After the last sheet is accumulated, the pack is
stapled.
When the test is complete, the printer returns to the original screen.
Finisher Feed Test
This test verifies that media can be fed to the finisher output bin.
To run the Finisher Feed Test, select Finisher Feed Test from the menu. The printer feeds eight pieces of media
to the finisher output bin.
Note: The sheets fed for this test are blank.
This test cannot be canceled or terminated once the test has begun. When the test is complete the printer
returns to the original screen.
Finisher Sensor Test
This test determines if the finisher sensors are working correctly.
To run this test:
1.
Select Finisher Sensor Test from the Finisher Tests menu.
•
If you Select Media 1 from the menu the following is displayed and the sensors polled:
Media Path 1
testing............
Once the sensors are polled, the following is displayed and the sensors are ready to test:
Media Path 1
S1=OP S2=OP
S1
S2
Once this screen is displayed you can manually actuate each of the sensors. When the sensor is
closed, CL is displayed, when the sensor is open OP is displayed.
3-28
Service Manual
=Punch Timing Sensor A
=Punch Timing Sensor B