Lexmark C752 Service Manual page 47

Error code
164 Motor
165 Motor
167 Motor
168 Motor
169 Motor
170 Motor
171 Motor
172 Motor
173 Motor
174 Motor
175 Motor
176 Motor
196 Service Thermal System
199 Service Reflash RIP
Action
Cyan cartridge BLDC motor mfg. unknown - go to
page 2-64.
Yellow cartridge BLDC motor mfg. unknown - go to
page 2-65.
The incorrect configuration ID. See
page 4-74 to set configuration ID.
Unknown manufacture type - perform
you do not find the problem after performing the test, call your next level
support.
Mirror motor lock not achieved - black - go to
on page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock - black - go to
page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lock not achieved - cyan - go to
on page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock - cyan - go to
page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lock not achieved - magenta - go to
diagnostics" on page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock - magenta - go to
page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lock not achieved - yellow - go to
on page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock - yellow - go to
page 3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
The printer has detected an error in the printhead thermal drift
compensation system. Perform the
The printer has detected an invalid version of the RIP code and must be
reflashed to the approved version. Contact your next level support.
"164 error code" on
"165 error code" on
"Web oiler fuser kit installation" on
"Motor Detect" on page
"Printhead diagnostics"
3-1.
"Printhead diagnostics" on
3-1.
"Printhead diagnostics"
3-1.
"Printhead diagnostics" on
3-1.
"Printhead
3-1.
"Printhead diagnostics" on
3-1.
"Printhead diagnostics"
3-1.
"Printhead diagnostics" on
3-1.
"Drift Sensor Check" on page
Diagnostic information
5060-2XX
3-17. If
3-16.
2-13