5060-2XX
Configuration Menu
The Configuration Menu contains a set of menus, settings and operations which are infrequently used by a user.
Generally, the options made available in this menu are used to configure a printer for operation.
Note: An asterisk(*) in the value list in the following menus indicates the default value.
To access to the Configuration Menu:
Turn the printer off, press and hold Select and Return while you turn the printer on and wait until Performing
Self Test is displayed. Release the buttons.
The following are available from the Configuration Menu:
ITU Cnt Value
Fuser Cnt Value
Reset Fuser Cnt
Prt Quality Pgs (This is not displayed if in Demo mode.)
Color Trapping
Tray Insert Msg
Size Sensing
Panel Menus
PPDS Emulation (This only displays if the PPDS interpreter is available.)
Demo Mode
Factory Defaults
Energy Conserve
Auto Color Adjust
Error Log
Font Sharpening
Paper Prompts
Env Prompts
Exit Config Menu (Press Select to exit CONFIG MENU and reboot.)
ITU Count Value
This is the page count of the current ITU. It cannot be reset unless a new ITU is installed.
Press Select to view the count value.
Fuser Cnt Value
Enter the Configuration Menu and select Fuser Cnt Value.
The value can be reset in Reset Fuser Cnt.
This only displays if the Maintenance Warning and Intervention function is enabled in the printer Configuration
ID. The fuser maintenance page counter is incremented when a page is printed and incremented by two when a
duplex sheet is printed. The counter can be used to track printer usage. When the counter reaches 200,000, the
printer posts a fuser maintenance message on the operator panel.
3-8
Service Manual