Error Code - Lexmark C752 Service Manual

153 error code

Yellow cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the
page 3-17. If this procedure is not performed, error code 168 is displayed.
Step Actions and questions
1 Indicates that the yellow cartridge drive motor has
either failed to lock or has lost lock. Check the yellow
cartridge drive motor cable connection to J29 on the
system board.
Is the cable installed correctly?
2 Check the yellow cartridge drive motor Cable
connection to the yellow cartridge drive motor card.
Is the cable installed correctly?
3 Check continuity of the yellow cartridge drive motor
cable.
Is there continuity?
4 Replace the yellow cartridge drive assembly. Perform
"Motor Detect" on page
Does this fix the problem?
5 Replace the system board.
Does this fix the problem?
3-17.
"Motor Detect" on
Yes No
Go to step 2 Install the cable
correctly
Go to step 3 Install the cable
correctly
Go to step 4 Replace the
yellow cartridge
assembly cable
Problem solved Go to step 5
Problem solved Call your next
level support
Diagnostic information
5060-2XX
2-59