Sub Error Code Table - Lexmark C752 Service Manual

5060-2XX

Sub error code table

Use this table to troubleshoot the printer when 9xx and 2xx Error Codes are displayed.
When a 9xx or 2xx error code is displayed, press and hold Return and press Select to view the Sub error code.
Sub error code
2D 00
2D 01
2D 02
2D 03
2D 04
2D 05
2D 06
2D 07
2D 08
2D 09
2D 0A
2D 0B
2D 0C
2D 0D
2D 0E
2D 0F
2D 10
2D 11
2D 12
2D 13
2D 14
2D 15
2D 16
2D 17
2D 18
2D 19
2D 1A
2D 1B
2D 1C
2-18
Service Manual
Explanation
No media available in duplex option.
Leading edge of image position has reached image halt location.
Paper jam detected. Sensor S2 was activated at an unexpected time.
Paper jam detected. Sensor S2 was not activated within the timeout period.
Paper jam detected. Sensor S2 did not deactivate during the timeout period.
Paper jam detected. Sensor NM was activated at an unexpected time.
Paper jam detected. Sensor NM did not deactivate during the timeout period.
Paper jam detected. The fuser exit sensor was activated at an unexpected time.
Paper jam detected. The fuser exit sensor did not deactivate by the previous page or the
current page did not activate the fuser exit sensor within the timeout period.
Paper jam detected. The fuser exit sensor did not deactivate during the timeout period.
Paper jam detected. A paper jam detected in the Duplex Option.
Paper jam detected. A paper jam detected in Tray 2.
Paper jam detected. A paper jam detected in Tray 3.
Paper jam detected. A paper jam detected in Tray 4.
S2 sensor was not made within timeout period (source is MPF).
S2 sensor was made too early.
S2 sensor was made too early (source is MPF).
Media versus registration error is out of acceptable bounds.
Media versus registration error is out of acceptable bounds (source is MPF).
Prism sensor detected incorrect media (source is MPF).
Prism sensor detected different media from the tray sensor.
Paper jam detected. A paper jam detected in Stacker 1.
Paper jam detected. A paper jam detected in Stacker 2.
Paper jam detected. A paper jam detected in Stacker 3.
Paper jam detected. A paper jam detected in Stacker 4.
Paper jam detected. A paper jam detected in Stacker 5.
Paper jam detected. A paper jam detected in Stacker 6.
Sensor (S2) has been activated or obstructed.
Fuser narrow media sensor obstructed.