Rear Bellcrank (Black) - Lexmark C752 Service Manual

Rear bellcrank (black)

1.
Power off the printer.
2.
Remove the four toner cartridges and leave the front door open.
3.
Remove "ITU assembly" on page
4.
Check each of the rear bellcranks for cracks or breakage.
5.
Remove the spring.
6.
Remove the stop screw (A) and two washers (B). Be careful not to lose the washers. Recommend using a
magnetic tipped screwdriver to remove the screw.
4-40.
5060-2XX
4-61
Repair information