Lexmark C752 Service Manual page 72

5060-2XX
User primary
message
59 Incompatible
Output Bin x
59 Incompatible
Tray x
59 Incompatible
Duplex
61 Defective Disk
62 Disk Full
63 Unformatted Disk
64 Unsupported Disk
Format
2-38
Service Manual
User secondary
Explanation
message
These messages are displayed when the user installs an
incompatible option.
The following options may be incompatible for use on one or
more C752 models:
• Output Bin x (x=1, 2 or 3)
• Tray x (x=2,3,4 or 5)
• Duplex
• Envelope feeder
The user is required to remove the incompatible option and
press Go to clear the message.
Note: If the user installed the incompatible option to satisfy a
Check Option Connections/Reattach Option attendance
condition, the user must reinstall an associated compatible
option or Hot Unplug the option.
This message is displayed when the printer detects a
defective disk. This error may occur at power on, or during
disk format and write operations.
Press Go to clear the message.
The disk is marked as defective and normal printer
operation continues.
Disk operations are not allowed with a defective disk and the
Format Disk menu item is not shown.
This message is displayed when there is not enough free
space on the disk to hold the data that have been requested
to be written to the disk. This message is displayed for both
resource collection and PostScript when the disk is full.
The following actions can be taken, however this deletes all
downloaded Fonts and Macros not written to disk.
• Press Go to clear the message and continue processing
• Press Menu to access the Busy/Waiting Menu
The following functions may be available:
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
This message is displayed when the printer detects an
unformatted disk at POST.
Press Go to clear the message.
The disk is marked as bad and normal operation continues,
however disk operation is not allowed until the disk is
formatted.
This message is displayed when the printer detects an
unsupported disk format at POST. This message may
appear if the disk was formatted on another system with a
different format.
Press Go to clear the message.
The disk is marked as bad and normal operation continues,
however disk operations is not allowed until the disk is
formatted.
the print job