Lexmark C752 Service Manual page 203

Sensor Test
This test verifies if the output bin sensors are working correctly.
The following Output options, if installed, are supported by this test.
Standard Bin
Output Expander
5-Bin Mailbox
To run the Output Bin Sensor Test:
1.
Select Sensor Test from the menu.
2.
Select the bin you want to test.
•
If Standard Bin is selected the following is displayed.
•
If Output Expander is selected the following is displayed:
•
If 5-Bin Mailbox is selected the following is displayed:
3.
Once the selection is displayed you can manually actuate the sensor you want to test. When the sensor is
closed (CL) displays, and when the sensor is open (OP) displays.
4.
To exit the test press Return or Stop.
Diver Wa P u o p cr
5060-2XX
3-27
Diagnostic aids