Printer Setup; Defaults; Page Counts - Lexmark C752 Service Manual

Printer Setup

Defaults

This setting is used by the printer to determine whether US or non-US factory defaults should be selected. The
following printer settings have different US and non-US values:
Default values
Printer setting
Paper size (paper feeding sources which do not have
hardware size sensing capabilities)
Envelope size
(Envelope feeding sources which do not have hardware size
sensing capability)
Fax paper size
PCL symbol set
PPDS code page
Universal units of measure
Warning: Modification of the printer setting Defaults causes the NVRAM space to be restored to the printer's
factory settings.

Page Counts

Setting the page counts
The printer's page count can be changed via the diagnostic menu. The Color and Mono Page Count can be
changed whenever the paper size sensing board is replaced.
Note: The Perm Page Count cannot be changed.
1.
Select Page Count from the Printer Setup Menu.
2.
Select either Color Page Count, Mono Page Count or Perm Page Count from the menu.
When you have made the selection, the following screen is displayed:
Color Page Count
=1234567*
3.
The left most digit blinks, indicating it is the first digit to be changed. To change the value, press either
Menu until the desired value is displayed. Press Select to move to the next digit. The digit blinks. Continue
modifying each digit using this method. To skip a digit and keep its current value, press Select.
4.
When you have completed selecting the final digit, press Select and the count is stored in NVRAM.
5.
Press Return to return to the Printer Setup Menu.
6.
Select a new test or select Exit Diagnostics from the Diagnostic Menu.
Viewing the permanent page count
The permanent page count can only be viewed from the operator panel and cannot be changed.
1.
Select Perm Page Count from the menu.
2.
The following screen will be displayed when permanent page count is selected:
Perm Page Count
=1234567*
3.
Press Return to return to the Printer Setup Menu.
4.
Select a new test or select Exit Diagnostics from the Diagnostic Menu.
US value Non-US value
Letter A4
10 Envelope DL Envelope
Letter A4
PC-8 PC-850
437 850
Inches Millimeters
Diagnostic aids
5060-2XX
3-33