Utilities Menu - Lexmark C752 Service Manual

Menu Item Purpose
Toner To lighten or darken printed output, or
Darkness
conserve toner.
Note: Setting Toner Darkness to values of
1, 2, or 3 is only effective when using the
PostScript driver.

Utilities Menu

Use the Utilities Menu to print a variety of listings relating to available printer resources, printer settings, and
print jobs. Other menu items let you set up printer hardware and troubleshoot printer problems.
Menu Item Purpose
Color To print a color alignment test page, which
Alignment can be used to properly align how colors
are printed.
You are prompted to enter alignment
values for each setting (A...L).
Coverage Provides an estimate of the percent
Estimator coverage of cyan, magenta, yellow, and
black on a page. This estimate is printed on
the page.
Defragment To retrieve storage area lost when
Flash resources are deleted from flash memory.
Do not turn off the printer while the flash is
defragmenting.
Factory To return your printer settings to the factory
Defaults default values.
Values
5 If Print Mode is Black & White, a
setting of 5 increases toner density
and darkness to all print jobs (PCL or
PostScript). If Print Mode is Color, a
setting of 5 is the same as 4.
4* Default toner darkness setting.
3 Reduction in toner consumption.
2 Further reduction in toner
consumption.
1 Maximum reduction in toner
consumption.
Values
0...20 (10*) Used to indicate which line is most
acceptable for alignments A...L.
Off* Percent coverage is not printed.
On Prints the estimated percentage of
coverage for each color on the page.
Yes Printer transfers all resources stored in
flash memory to printer memory and
then reformats the flash memory
option. When the format operation is
complete, the resources are loaded
back into flash memory.
No Printer cancels the request to
defragment the flash memory.
Restore • All menu items are returned to the
factory default values except:
- Display Language.
- All settings in the Parallel
Menu, Serial Menu, Network
Menu, and USB Menu.
• All downloaded resources (fonts,
macros, and symbol sets) in printer
memory (RAM) are deleted.
(Resources residing in flash
memory or on the hard disk are
unaffected.)
Do Not User-defined settings remain.
Restore
5060-2XX
2-25
Diagnostic information