Troubleshooting A Damaged Enclosure - Dell Power Supply C8000 Owner's Manual

14 Reconnect the enclosure to the electrical outlet or the PDU.
15 Turn on the sleds and attached peripherals.
16 If the system fails to start, see "Getting Help" on page 289.

Troubleshooting a Damaged Enclosure

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the sleds and attached peripherals.
2 Disconnect the enclosure from the electrical outlet or the PDU.
3 Ensure that the following components are properly installed in the
enclosure:
• Power sleds
• Fan modules
• Compute or storage sleds
4 Ensure that all components are properly installed in the sled. See the sled's
documentation for more information.
5 Ensure that all cables are properly connected.
6 Ensure that all components are properly installed and free of damage.
7 If the system fails to start, see "Getting Help" on page 289.
256
Troubleshooting
Many repairs may only be done by a certified service technician. You