Troubleshooting A Damaged Enclosure - Dell PowerEdge C8000 Hardware Owner's Manual

Dell poweredge c8220 hardware owner's manual
Hide thumbs Also See for PowerEdge C8000:
Table of Contents

Advertisement

11 Reinstall the sled. See "Installing a Sled" on page 130.
12 Reconnect the server enclosure to the electrical outlet or the PDU.
13 Turn on the sleds and attached peripherals.
14 If the system fails to start, see "Getting Help" on page 203.

Troubleshooting a Damaged Enclosure

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the sleds and attached peripherals.
2 Disconnect the enclosure from the electrical outlet or the PDU.
3 Ensure that the following components are properly installed in the
enclosure:
Power sleds
Fan modules
Sleds
4 Ensure that the following components are properly installed in the sled:
SD card reader
Node power distribution board
Interposer extender
Mezzanine card
Expansion card
Memory modules
Processors and heat sinks
Cooling shroud
Hard-drives
5 Ensure that all cables are properly connected.
6 Ensure that all components are properly installed and free of damage.
182
Troubleshooting
Many repairs may only be done by a certified service technician. You

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge c8220

Table of Contents