Steps
Reconnect the peripherals and connect the system to the electrical outlet, and then power on the system.
XR8000r chassis
Removing a sled blank
Prerequisites
Follow the safety guidelines listed in
Steps
Pull the sled blank to remove it from the enclosure.
Figure 12. Removing a sled blank
Next steps
Install a sled
or
sled
blank.
Installing a sled blank
Prerequisites
Follow the safety guidelines listed in
Steps
1. Align the sled blank with the bay of the chassis.
2. Insert and push the sled blank, until it locks into place.
48
Installing and removing system components
Safety
instructions.
Safety
instructions.