Table of Contents
Advertisement
Installing a sled blank
Prerequisites
Follow the safety guidelines listed in
Steps
1. Align the sled blank with the bay of the chassis.
2. Insert and push the sled blank, until it locks into place.
Figure 16. Installing a sled blank
Removing a sled
Prerequisites
1. Follow the safety guidelines listed in the
2. Remove the front bezel, if applicable.
Steps
1. Pull the blue lever on the sled to release the sled handle.
2. Holding the sled handle, slide the sled out of the enclosure.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
CAUTION:
Support the system with both hands while sliding it out of the enclosure.
50
Installing and removing system components
Safety
instructions.
Safety
instructions.
Advertisement
Table of Contents
