Displaying The Power Supply System Information About Your Switch - HP 12500 Series Installation Manual

Displaying the power supply system information about your
switch
Use the display power-supply command to display power supply system information about your switch,
including whether power management is enabled, the number of configured redundant power supplies,
power, output voltage and current, and whether each card is powered on.
# Display detailed information about the power supply system.
<Sysname> display power-supply verbose
Power info on chassis 2:
System power-supply policy: enable
System power-module redundant(configured): 1
System power usable: 2000 Watts
System power redundant(actual): 0 Watts
System power allocated: 1265 Watts
System power available: 735 Watts
System power used(current): 398.49 Watts
System power monitoring unit 1:
Type
----------
PSE9000-A
DC output voltage information:
Tray Value(V)
---- --------
1 49.81
DC output current information:
Total current(A): 8.00
Branch
------
1/1
1/2
1/3
1/4
1/5
1/6
PSU Status:
ID Status
--- ------- ----------- ---------- ---------------- ------- ------ -------------
1/1 Absent
1/2 Absent
1/3 Normal
1/4 Absent
1/5 Fault
1/6 Absent
Software version: 107
In/Out Rated-Vol(V)
------ ------------
AC/DC 220(default)
Upper-Threshold(V)
------------------
51.00
Value(A)
--------
N/A
N/A
8.00
N/A
Unknown
N/A
Input-Err Output-Err High-Temperature Fan-Err Closed Current-Limit
Existing Usable
-------- ------
2 1
Lower-Threshold(V)
------------------
49.00
66
Redundant(actual)
-----------------
0
Status
-------
Normal