Using The Hafm Application; Managing The Appliance; Logging In To Hafm; Hafm Log In Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

2

Using the HAFM application

This chapter provides instructions for using the HAFM application. The following topics are
described:
• Managing the
• Viewing the HAFM main
• Accessing the HAFM
• Monitoring the HAFM
• Using Group
• Configuring
• Exporting and importing
• Backing up and restoring
• Changing the Backup Time

Managing the appliance

This section describes how to add, remove, log in to, and log out of the HAFM appliance.

Logging in to HAFM

You must log in to a appliance to monitor a SAN.
NOTE: You must have a login and password account on the HAFM appliance in order to log in.
1. The HAFM Log In dialog box is displayed automatically when you open HAFM
Figure 3

HAFM Log In dialog box

The HAFM appliance address is displayed in the Network Address field.
2. You can specify a new address by typing it in the field, or selecting one from the list.
NOTE: Localhost is the default. HAFM determines the local IP address and uses it to log in.
appliance, page 31
window, page 33
application, page 36
application, page 41
Manager, page 44
nicknames, page 59
data, page 62
data, page 67
Interval, page 72
(Figure
HA-Fabric Manager user guide
3).
31