Task 8: Configure The Switch To The Hafm Application; Task 9: Record Or Verify Hafm Server Restore Information; New Product Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Installing and Configuring the Edge Switch 2/24

Task 8: Configure the Switch to the HAFM Application

To manage a new switch, it must be identified to the HAFM application. To identify
the new switch:
1. Right-click in a blank area of the Product View and select New or click Product
on the menu bar and choose New. The New Product dialog box displays, as
shown in
Figure 2–24: New Product dialog box
2. Type the IP address or DNS host name of the switch (determined by the
customer's network administrator).
3. Select edge-24 from the Product Type field and click OK. A new switch icon
displays at the Product View.
4. Repeat step 1

Task 9: Record or Verify HAFM Server Restore Information

Configuration information must be recorded to restore the HAFM server in case of
hard drive failure. The Windows 2000 operating system and the HAFM with Edge
Switch 2/24 product manager application must also be restored. Refer to the hp
StorageWorks edge switch 2/24 service manual for instructions.
To record or verify HAFM server configuration information refer to the hp
StorageWorks HAFM server installation guide for instructions.
2-36
Figure 2–24.
through step 3 for each new switch.
edge switch 2/24 installation guide