Viewing Reports; Select Template Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

To generate a report:
1. Select Monitor > Reports > Generate.
The Select Template dialog box is displayed
Figure 71

Select Template dialog box

NOTE: You can generate a report of the Physical Map by clicking Generate Reports (or pressing
Ctrl-G) on the right-hand toolbox while viewing a discovered SAN.
2. Select the type(s) of reports you want to generate.
3. Click OK.
The generated reports are automatically displayed in the Reports dialog box.
4. To print the report:
a. Click Show in Browser.
The selected report is displayed in your default web browser.
b. Select File > Print in the web browser.
c. Close the web browser and the Reports dialog box.
NOTE: Hyperlinks in reports are active as long as the source data is available.

Viewing reports

You can view reports through the application or through a web browser. Reports are stored in
Install_Home
1. Select Monitor > Reports > View.
Server\Reports\.
\
(Figure 71).
HA-Fabric Manager user guide 119