HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 225

Table 29 HAFM messages (continued)
Message
Duplicate World Wide
Name in nickname
configuration.
Duplicate zone in zone
set configuration.
Duplicate zone member
in zone configuration.
Element Manager
instance is currently open.
Enabling this zone set will
replace the currently
active zone set. Do you
want to continue?
Error connecting to
switch.
Error creating zone.
Error creating zone set.
Error deleting zone.
Error deleting zone set.
Error reading log file.
Description
A WWN can be
associated with only one
nickname.
More than one instance
of a zone is defined in a
zone set.
More than one instance
of a zone member is
defined in a zone.
A product cannot be
deleted while an instance
of the Element Manager
is open for that product.
Only one zone set can be
active. By enabling the
selected zone set, the
current active zone set will
be replaced.
While viewing routes, the
HAFM appliance was
unable to connect to the
switch. The switch failed
or the switch-to-HAFM
appliance Ethernet link
failed.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an internal
error.
The HAFM application
encountered an error
while trying to read the
log.
Action
Modify (to make it unique) or
delete the selected WWN.
Delete one of the duplicate zones
from the zone set.
Delete one of the duplicate zone
members from the zone.
Close the Element Manager, then
delete the product.
Click OK to continue or Cancel to
end the operation.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
HA-Fabric Manager user guide 225