HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 231

Table 29 HAFM messages (continued)
Message
Remote session support
has been disabled.
Resource is unavailable.
Route data corrupted.
Route request timeout.
Routing is not supported
by the switch.
SANtegrity Feature not
installed. Please contact
your sales representative.
Select alias to add to
zone.
Selection is not a World
Wide Name.
Server shutting down.
SNMP trap address not
defined.
Description
The connection between
the specified remote
workstation and the
HAFM appliance was
disallowed.
The specified operation
cannot be performed
because the product is
unavailable.
The information for this
route is corrupt.
The Show Route request
timed out.
This switch or director
does not support the
Show Routes feature.
You selected Fabric
Binding or Enterprise
Fabric Mode from the
Fabrics menu. These
selections are not
enabled because the
optional SANtegrity
binding feature is not
installed.
An alias was not selected
before clicking Add.
The selection made is not
a WWN.
The HAFM application is
closing and terminating
communication with the
attached product.
If an SNMP community
name is defined, a
corresponding SNMP
trap recipient address
must also be defined.
Action
Consult with the customer's network
administrator to determine if the
workstation entry should be
modified at the Remote Access
dialog box.
Verify the HAFM
appliance-to-product link is up. If
the link is up, the HAFM appliance
can be busy. Try the operation
again later.
Try the operation again. If the
problem persists, contact the next
level of support.
Try the operation again. If the
problem persists, contact the next
level of support.
Choose a different switch or
director to show the route.
Install the SANtegrity Binding
feature to use Fabric Binding or
enable Enterprise Fabric Mode.
Choose an alias before clicking
Add.
Choose a valid WWN before
performing this operation.
Reboot the HAFM appliance. If the
problem persists, contact the next
level of support.
Enter a corresponding SNMP trap
recipient address.
HA-Fabric Manager user guide 231