Backing Up To A Network Drive - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

4. Click Apply or OK.
For local clients, the application verifies that the device exists. If the device does not exist, an
error message indicates that you have specified an invalid device. The default backup interval is
6 hours (360 minutes). This can be modified if desired as described in
Time Interval" on page 72.

Backing up to a network drive

To back up to a network drive, your workstation must be in the same domain and you must have
rights for the network drive in order to copy files. The System Administrator can verify the user rights
to the network drive. The network drive must be mounted on the appliance.
The HAFM Appliance must be configured in the same domain or workgroup, and must have
network drive access rights. The user name and password for accessing the network drive must also
be a user name with the same password configured on the HAFM Appliance, and this user must
have Administrator user rights.
1. Select Start > Settings > Control Panel > Administrative Tools > Services.
The Services dialog box is displayed.
2. Right-click HAFM 8.8 Backup and select Properties.
The Properties dialog box is displayed.
3. Click Log On.
4. Click This account and enter the account name for the user who has rights to the network drive.
If required, click Browse to select a valid user account name and directory path.
5. Enter a password in the Password and Confirm password boxes.
6. Click OK to apply changes and to close the HAFM 8.8 Backup Properties dialog box.
7. The system prompts you to stop and start the HAFM 8.8 Backup or HAFM 8.6 Backup service.
Right-click the HAFM 8.8 Backup or HAFM 8.6 Backup entry and select Stop.
8. When the process completes, select Start, or alternatively, Restart at the prompt.
9. Click the close (X) icon on the Services dialog box...
10. Select SAN > Options on the HAFM appliance.
The Options dialog box is displayed.
1 1. Select Backup in the Category list.
The currently defined directory is displayed in the Backup Output Directory field.
12. Click Browse and select the mapped network drive and directory to which you want to back up
your data.
The default directory is D:\Backup. It is assumed that a D: is a CD-RW drive. Browse is only
available on a local client, not a remote client.
13. Click Apply or OK.
For local clients, the application verifies that the device exists. If the device does not exist, an
error message is displayed indicating that you have specified an invalid device.
If your are using a remote client, when you click Apply or OK, HAFM does not verify that the
drive exists, it just saves the settings. The default backup interval is 6 hours (360 minutes). This
can be modified if desired as described in "Changing the Backup Time
HA-Fabric Manager user guide
"Changing the Backup
Interval" on page 72.
71