The Edit Link Threshold dialog box is displayed
Figure 85
Edit Link Threshold dialog box
4.
Make changes to the threshold, if necessary.
5.
Click OK to accept the changes and close the Edit Link Threshold dialog box.
If the threshold has already been assigned to ports, the message This edit will apply
to affected switches is displayed. Click OK to close.
6.
To assign this threshold to fabrics, switches, or switch ports, see
page 136.
7.
Click OK.
Editing security thresholds
To edit a security threshold:
1.
Select Configure > Port Fencing.
The Port Fencing dialog box is displayed
2.
Select Security from the Violation Type list.
3.
Click Edit.
The Edit Security Threshold dialog box is displayed
Figure 86
Edit Security Threshold dialog box
4.
Make changes to the threshold, if necessary.
5.
Click OK to accept the changes and close the Edit Security Threshold dialog box.
If the threshold has already been assigned to ports, the message This edit will apply
to affected switches is displayed. Click OK to close.
138
Optional HAFM features
(Figure
85).
(Figure 80
on page 134).
(Figure
86).
"Assigning
thresholds" on