HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 213

Table 26 Address problems and resolutions (continued)
Problem
LUN Management is not
available on HP-UX systems.
Encountering errors when
performing LUN management
on HDS systems.
Resolution
The LUN management feature is not currently supported
on HP-UX systems. It is only available on Windows,
Solaris, and AIX systems.
1. Make sure the HiCommand Device Manager
(server) is online.
2. Ensure that communication between HiCommand
Device Manager and the storage array is intact.
When the HiCommand Device Manager cannot
communicate to the device, the following error will
display: An error was encountered during this
operation. Some of the operation can have been
applied to the storage subsystem. A refresh of the
storage subsystem is recommended. Please contact
your System Administrator if you are a local user.
3. To make sure HiCommand server is able to
communicate to the storage device, launch
HiCommand GUI and refresh the array.
See the following documents on HiCommand Device
Manager for HiCommand installation, GUI usage, and
error codes:
•
Hitachi HiCommand Device Manager Server
Installation and Configuration Guide
•
Hitachi HiCommand Device Manager Web Client
User's Guide
•
Hitachi HiCommand Device Manager Error Codes
HA-Fabric Manager user guide 213