HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 248

Table 30 Element Manager messages (continued)
Message
Feature not supported.
The 'product name' must
be running version
05.00.00 or higher.
Field cannot be blank.
Field has exceeded
maximum number of
characters.
File transfer aborted.
File transfer is in progress. A firmware file is being
Firmware download
timed out.
Firmware file I/O error.
Firmware file not found.
248 Informational and error messages
Description
The firmware version on
the hardware product
(switch or director) is
lower than 05.00.00.
This message is displayed
if the optional Open
Trunking feature is
installed.
The data field requires an
entry and cannot be left
blank.
The maximum number of
data entry characters
allowed in the field was
exceeded.
You aborted the file
transfer process.
transferred from the
HAFM appliance hard
drive, or a data collection
file is being transferred to
a CD.
The director or switch did
not respond in the time
allowed. The status of the
firmware install operation
is unknown.
A firmware download
operation aborted
because a file I/O error
occurred.
The firmware version is
not installed (or was
deleted) from the
firmware library at the
HAFM appliance.
Action
Install firmware version 5.00.00 or
higher on the hardware product.
Enter appropriate information in
the Data field.
Enter the information using the
prescribed number of characters.
Information message only.
Informational message only—no
action is required.
Retry the operation. If the problem
persists, contact the next level of
support.
Retry the operation. If the problem
persists, contact the next level of
support.
Add the firmware version to the
library and retry the operation.