HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 224

Table 29 HAFM messages (continued)
Message
Connection to
management server lost.
Click OK to exit
application.
Could not export log to
file.
Default zoning is not
supported in Open Fabric
Mode.
Device is not a member of
a zone in the active zone
set.
Download complete.
Click OK and start the
HAFM.
Duplicate community
names require identical
write authorizations.
Duplicate Fabric Name.
Duplicate name in zoning
configuration. All zone
and zone set names must
be unique.
Duplicate nickname in
nickname configuration.
224 Informational and error messages
Description
The HAFM application at
a remote workstation lost
the network connection to
the HAFM appliance.
A log file input/output
(I/O) error occurred and
the file could not be
saved to the specified
destination. The disk can
be full or write protected.
A default zone cannot be
enabled when the
product is enabled for
Open Fabric mode. Open
Fabric mode does not
support zone members
defined by port numbers.
The selected device is not
a member of a zone in
the active zone set and
therefore cannot
communicate with the
other devices in the route.
Download of HAFM and
the Element Manager is
complete.
If configuring two
communities with
identical names, they
must also have identical
write authorizations.
The specified fabric name
already exists.
Every name in the zoning
library must be unique.
Duplicate nicknames
cannot be configured.
Action
Restart the HAFM application to
connect to the HAFM appliance.
If the disk is full, use another disk. If
the disk is write protected, change
the write-protect properties or use
another disk.
Change the Interop Mode from
Open Fabric to Homogeneous
using the Configure Fabric
Parameters dialog box. You can
also redefine zone members by the
device WWN.
Enable the default zone or activate
a zone set containing the member
before attempting to show the
route.
Start the HAFM application to
continue.
Verify that both communities with
the same name have the same
write authorizations.
Choose another name for the
fabric.
Modify (to make it unique) or
delete the duplicate name.
Modify the selected nickname to
make it unique.