HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 208

Table 24 Discovery problems and resolutions (continued)
Problem
Broadcast request is blocked by
routers.
Discovery time is excessive.
Cannot open an Element
Manager for an HP device.
The symapi.jar file is not in
the class path.
208 Troubleshooting
Resolution
Resolution 1: If you know the IP addresses, and they are
not in the Available Addresses list:
1. Select Discover > Setup.
2. Click Add.
3. Enter data in the dialog box.
4. Click OK.
5. Repeat steps step 1 through
addresses are available.
6. Select the IP addresses you would like to discover in
the Available Addresses list.
7. Click to move your choices to the Selected
Individual Addresses list.
8. Click OK.
Resolution 2: If you know the IP addresses and the
addresses are listed in the Available Addresses list:
1. Select Discover > Setup.
2. Select the IP addresses you would like to discover in
the Available Addresses list.
3. Click to move your choices to the Selected
Individual Addresses list.
4. Click OK.
Resolution 3:
This method significantly increases your discovery time.
If you don't know the specific IP addresses:
1. Select Discover > Setup.
2. Click the Method column for the selected subnet in
the Selected Subnets list and select Sweep.
3. Click OK.
Resolution 1:
1. Select Discover > Setup.
2. Click the Method column in the Selected Subnets
pane and select Broadcast.
3. Click OK.
Resolution 2: Decrease the SNMP timeout to decrease
the discovery time.
Ensure that only one copy of the application is being
used to monitor and manage the device.
Verify that the symapi.jar file has been copied to
HAFM's lib directory.
step 4 until all