Event Management; Event Trigger Properties; Snmp Trap Event Properties; Connection Performance As Displayed On Physical Map - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

NOTE: In Figure
Figure 126

Connection performance as displayed on Physical Map

Figure 127

Switch on topology showing ports

Event Management

Event Management enables you to specify triggers and actions to automate tasks. For example, you
can set an event trigger to fire at a certain time and day (everyday at noon) and associate the
action of sending an e-mail message.

Event trigger properties

This section describes the properties you can set for event triggers.

SNMP trap event properties

SNMP trap events occur when the appliance receives an SNMP trap.
Table 37 describes trap event properties.
Table 37

SNMP trap event properties

Property
IP Address
Node Name
Port Name
126, gray lines on the HBA indicate no activity on those connections.
Description
Device's IP address
Device's WWN
Port's WWN
HA-Fabric Manager user guide 275