Enabling Execution Options; Confirming Firmware Installation; Confirming Firmware Installation Parameters Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Enabling execution options

Perform the following actions until all the firmware is installed on the selected products:
Select Pause before starting each action to enable a Continue button on the Install tab.
1.
This gives you more control over the installation process.
Select Halt on error to be notified if an error occurs during an installation. If there is an error,
2.
the process stops and the action will not be started on the remaining selected products.
3. Click Next or select the Install tab to display the Confirm Firmware Installation Parameters
dialog box.

Confirming firmware installation

The Confirm Firmware Installation Parameters dialog box lets you confirm group membership and
install firmware
Figure 16

Confirming Firmware Installation Parameters dialog box

To perform firmware installation:
Click Start to begin the firmware installation.
1.
2. If you selected Pause before starting each action, click Continue each time it becomes
enabled.
During firmware installation, the status is displayed. The status can be one of the following:
• Not started
• In Progress
• Failed
• Completed
52 Using the HAFM application
(Figure 16).