Adding A Zone To A Zone Set; Adding A Member To A Zone; Add Zone Member Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

NOTE: If the Zoning dialog box is open for longer than 30 minutes, the information displayed
cannot be current. Reopen the dialog box to increase zoning discovery speed and get the updated
information.

Adding a zone to a zone set

To add a new or existing zone to a zone sets:
1. Display the zone library. See
The Zoning dialog box is displayed
2. To create a new zone, click New Zone.
A new zone is displayed in the Zones list.
3. To add an existing zone, proceed to
4. Rename the zone. See
5. Select the members to add to the new zone from the Potential Zone Members list.
6. Select the new zone from the Zones list.
7. Click to the right of the Potential Zone Members list to add the selected members to the zone.
8. Select an option from the Zoning Method list.
9. Select the zone sets to which you want to add the zone from the Zone Sets list.
10. Select the zones you want to add to the zone set from the Zones list.
1 1. Click to the right of the Zones list to add the selected zones to the zone sets.
12. To activate the zone set, see
Click OK.
13.

Adding a member to a zone

To add a new or existing member to a zone:
Display the zone library. See
1.
2. Select the zones to which you want to add members from the Zones list.
3. To add an existing member, skip to
4. To create a new member, click New Member.
The Add Zone Member dialog box is displayed
Figure 99

Add Zone Member dialog box

160 Zoning
"Displaying the zone
(Figure 98
step 9.
"Zoning naming conventions" on page 158.
"Activating a zone
"Displaying the zone
step 7.
library" on page 159.
on page 159).
set" on page 162.
library" on page 159.
(Figure 99).