HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 236

Table 29 HAFM messages (continued)
Message
You must download the
HAFM client via the web
install.
Zones configured with
port numbers are ignored
in Open Fabric Mode.
Zones must be defined
before creating a zone
set.
Zoning by port number is
ignored in Open Fabric
Mode.
Zoning by port number is
not supported in Open
Fabric Mode.
Zoning name already
exists.
236 Informational and error messages
Description
An attempt was made to
download the HAFM
application to a remote
workstation (client) using
an improper procedure.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through
WWNs.
You cannot create a zone
set without any zones
defined for HAFM.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through
WWNs.
You cannot specify an
item for zoning by port
number if HAFM is in
Open Fabric Mode.
Duplicate zone names
are not allowed in the
zoning library.
Action
Download a compatible version of
the HAFM application to the
remote workstation (client) using
the web install procedure.
Informational message only–no
action is required.
Define zones using the New Zone
dialog box.
Informational message only–no
action is required.
Either define zones by WWN of
device or change to Homogeneous
Fabric mode in the Configure
Operation Mode dialog box of the
Element Manager.
Modify (to make it unique) or
delete the duplicate zone name.