HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 247

Table 30 Element Manager messages (continued)
Message
Element Manager error
<number>.
Element Manager
instance is currently open.
Enterprise Fabric Mode
will be disabled if any of
the following parameters
are disabled: Insistent
Domain ID, Rerouting
Delay, Domain RSCNs.
Do you want to continue?
Error retrieving port
information.
Error retrieving port
statistics.
Error stopping port
diagnostics.
Error transferring files <
message >.
Description
The Element Manager
encountered an internal
error and cannot
continue.
A Element Manager
window is currently open.
You attempted to disable
these parameters in the
Configure Switch
Parameters dialog box
while the switch was
online, but Enterprise
Fabric Mode (SANtegrity
Binding feature) is
enabled.
An error occurred at the
Element Manager while
retrieving port information
because the Ethernet link
is down or busy.
An error occurred at the
Element Manager while
retrieving port statistics
because the Ethernet link
is down or busy.
An error occurred at the
Element Manager while
attempting to stop port
diagnostics from running
because the Ethernet link
is down or busy.
An error occurred while
transferring files from the
PC hard drive to the
Element Manager. The
message varies,
depending on the
problem.
Action
Contact the next level of support to
report the problem.
Informational message only.
Click Yes if you want to continue,
and disable Enterprise Fabric
Mode.
Retry the operation later. If the
condition persists, contact the next
level of support.
Retry the operation later. If the
condition persists, contact the next
level of support.
Retry the operation later. If the
condition persists, contact the next
level of support.
Try the file transfer operation
again. If the problem persists,
contact the next level of support.
HA-Fabric Manager user guide 247