Managing Firmware Versions; Select Firmware Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Managing firmware versions

The Select Firmware option lists all firmware that can be installed on a product in the selected
products list. Use this tab to add, revise and delete firmware.
Click Next from Select Switches/Directors dialog box, or click the Select Firmware tab. The
1.
Select Firmware dialog box displays
NOTE:
any one of the selected switches.
2. If the firmware you want to install appears in the Firmware Library table, go to step 10.
If the firmware you want to install does not appear in the Firmware Library table, Click Add. The
3.
Add Firmware dialog box displays.
Figure 14

Select Firmware dialog box

NOTE:
successfully filed in the library, is displayed.
4. Enter a new Description for the firmware.
Enter a Path or click Browse to select a path for the firmware.
5.
6. Click OK.
If you attempt to load firmware that already exists in the library, an error message displays.
Otherwise, the Add Firmware dialog box closes.
50 Using the HAFM application
An error message appears if no firmware is found in the library that is applicable to
After the addition of new firmware, a message, which states the firmware is
(Figure 14).