Number Of Ip Multicast Addresses Allowed; Configuring And Displaying Igmp (Cli); Viewing Igmp Configuration For Vlans - HP 2920 Series Multicast And Routing Manual

For wb.15.16
Hide thumbs Also See for 2920 Series:
Table of Contents

Advertisement

Operation with or
without IP
addressing
Querier capability
To configure high priority settings for traffic, see "Quality of Service: managing bandwidth more
effectively" in the Advanced Traffic Management Guide.
NOTE:
Whenever IGMP is enabled, the switch generates an Event Log message indicating
whether querier functionality is enabled.
IP multicast traffic groups are identified by IP addresses in the range of 224.0.0.0 to
239.255.255.255. Also, incoming IGMP packets intended for reserved, or "well-known" multicast
addresses, automatically flood through all ports (except the port on which the packets entered the
switch.) For more on this topic, see
multicast filtering" (page
For more information about IGMP, see

Number of IP multicast addresses allowed

The number of IGMP filters (addresses) and static multicast filters available is 2,038. Additionally,
16 static multicast filters are allowed, If multiple VLANs are configured, then each filter is counted
once per VLAN in which it is used.

Configuring and displaying IGMP (CLI)

Viewing IGMP configuration for VLANs

Syntax:
show ip igmp [vlan <vid>]
Displays IGMP configuration for a specified VLAN or for all VLANs on the switch.
8
Multimedia Traffic Control with IP Multicast (IGMP)
group. This means that IGMP traffic will be forwarded on a specific port only
if an IGMP host or multicast router is connected to the port.
Causes the switch to drop all IGMP transmissions received from a specific
Blocked
port. Outgoing queries are not blocked on the port.
Causes the switch to forward all IGMP and IP multicast transmissions through
Forward
the port.
This feature helps to conserve IP addresses by enabling IGMP to run on VLANs that do
not have an IP address. See
The switch performs this function for IGMP on VLANs having an IP address when there is
no other device in the VLAN acting as querier. See
"Well-known or reserved multicast addresses excluded from IP
24).
"How IGMP operates" (page
"Operation with or without IP addressing" (page
"Using the switch as querier" (page
14).
15).
23).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J9726aJ9729aJ9727aJ9728a

Table of Contents