Copying Symmetrically To A Point; Copying To The X Axis - Brother BAS-311F-0 Instruction Manual

Copying symmetrically to a point

Command to be used
1. Move the needle to the desired position.
Refer to "Moving needle point" (page 123).
2. Input

Copying to the X axis

Command to be used
1. Move the needle to the desired position.
Refer to "Moving needle point" (page 123).
2. Input
Copying data symmetrically to the current needle position from the start
point or the feed point (excluding the number of feed boundaries to be
ignored) to the current needle position
.
Copying data to the X axis passing the current needle position from the
start point or the feed point (excluding the number of feed boundaries to be
ignored) to the current needle position
.
Programmer
Chapter 3 Programming with Command Function
189