Zigzag Stitch - Brother BAS-311F-0 Instruction Manual

Chapter 2 Programming with Help Function
2. Select with
3. Input the data number and press
4. Press .
Ending program
1. Press .

Zigzag stitch

Zigzag with curves may be programmed.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Select with
3. Move the work clamp with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
46
and press .
.
Zigzag stitch is programmed. The example in the left is used
for explanation of even width of zigzag stitch on the sewing
path.
and press .
. Press
Programmer