Lines - Brother BAS-311F-0 Instruction Manual

Lines

Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Select with
3. Move the work clamp with
when the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
4. Select with
5. Input the stitch length and press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6. Move the work clamp with
when the needle point is at point B of the
pattern.
7. Repeat step 6 and create the program to point
E.
8. When point E is programmed, press
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
and press .
. Press
and press .
.
. Press
twice.
Programmer
Chapter 2 Programming with Help Function
29