Programming example
Frequently used programming method is explained here. Refer to "Programming" (page 85) for
function and operation of each icon.
Programming for each stitch
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Select
with
3.
Move the work clamp with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4.
Select
with
5.
Move the work clamp with
when the needle point is at point B of the
pattern.
6.
Repeat step 5 and create the program to point
C.
Program each stitch according to the pattern. The example in
the left is used for explanation.
and press
.
. Press
and press
.
. Press
Programmer
Chapter 2 Programming with Help Function
25