Chapter 2 Programming with Help Function
Creating a multiple stitch
1.
Select
and press
2.
Input the stitch length and the number of lines for a multiple stitch. Press
3.
Move the needle point with
When the embroidering direction should be changed, provide a split by pressing
Press
and move the needle point from the inside line to the outside line (reversely).
valid after input of a split.
When programming, be sure that the points and splits specified on the inside line are paired with those
on the outside line respectively.
4.
When the needle point has reached the end point, press
A buzzer sounds. Calculation is performed based on the input data. A buzzer stops on completion of
programming.
106
.
and press
Programmer
.
three times.
.
twice.
becomes