Brother BAS-311F-0 Instruction Manual page 152

Programming a new point.
1. Press
.
2. Move the work clamp with
needle point is at 1' of the pattern.
Record the coordinates (values of
3. Press .
1' is programmed.
4. Move the work clamp with
opposite position of coordinates recorded in
step 2 and press
If the moving distance is long, press
5. Press .
The work clamp returns to the home position.
Deleting 1
1. Press and press
The needle point returns to the first stitch.
2. Press .
3. Input the number of stitches to be deleted and
press .
The example is deleting 1 stitch. Press
4. The needle point moves to 1'.
Saving
1. Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1. Press .
so that the
and ).
.
.
.
Programmer
Chapter 3 Programming with Command Function
to the
.
151