Brother BAS-311F-0 Instruction Manual page 218

Checking the image display (go to 7 when not checking)
4. Press and select
5. Press to turn on.
Press to turn off again.
6. Press .
An image is displayed. This is the image from data saved in a floppy disk, not the image currently in
editing. Press
Displays the stitch count.
Displays the lateral length.
Displays the longitudinal length.
7. Press to read the data.
To cancel reading, press
.
or to return to the submenu.
.
OFF is highlighted if selected.
Press to display the overall sewing data.
Press to display the overall view of the data.
Programmer
Chapter 5 Reading/Writing Data
217