Brother BAS-311F-0 Instruction Manual page 116

If is selected
Data chunks separated with feed data are resized and copied.
If the number of feed boundaries to be ignored is 0:
If the number of feed boundaries to be ignored is 1:
If the number of feed boundaries to be ignored is 2:
1. Input resizing scale in the X and Y directions.
Switch between X and Y directions with
Resizing scale between 0 and 400% are available.
2. Input the stitch length.
Switch between the input fields of stitch length with
If the stitch length is 0.0, the pattern is resized with the same number of stitches as the original data.
Only A is copied.
A' becomes a split program.
A and B are copied.
A' and B' become split programs.
A, B and C are copied.
A', B' and C' become split programs.
.
Programmer
Chapter 2 Programming with Help Function
.
115