Resizing
1.
Move the needle to the reference point of
resizing with
The pattern is resized to the home position if the
needle is not moved.
2.
Press
Input the resizing command.
3.
Press
Input the resizing percentage for the X axis.
Specify the magnification percentage by 3 digits in
. 150% is specified in the example.
4.
Press
Input the resizing percentage for the Y axis.
Specify the magnification percentage by 3 digits
in
. 150% is specified in the example.
5.
Input the stitch length. Press
If the stitch length is 0.0, the pattern is resized
with the same number of stitches as the original
data.
Saving
1.
Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1.
Press
.
.
and press
.
and press
.
and press
.
.
Programmer
Chapter 3 Programming with Command Function
145