Reading Additional Data - Brother BAS-311F-0 Instruction Manual

Chapter 5 Reading/Writing Data

Reading additional data

This is used to read other data continuously after reading a data.
Additionally read data is added to the editing data as a split data.
This operation cannot be available in command mode.
Data created in BAS-300, BAS-300A and BAS-300E series can also be read.
1. Select and press
2. Select and press
3. Input the number of program with a numeric key.
If there is data,
If there is no data,
Checking the image display (go to 7 when not checking)
4. Press and select
5. Press to turn on.
Press to turn off again.
214
.
.
appears.
appears. If appears, the data is from BAS-300 or BAS-300A series.
.
OFF is highlighted if selected.
Programmer