Creating A Multiple Stitch - Brother BAS-311F-0 Instruction Manual

Creating a multiple stitch

Command to be used
1. Determine the embroidering start point with
2. Press
3. Move the needle point to the second point or after with
4. When the needle point is moved to the corner, press
5. Repeat steps 3 and 4 until the end point of the inside (or the outside) line is input. Press
the needle point to the start point of the outside (or the inside) line with
6. Program all necessary points in the same manner.
7. Input the desired number of lines as
8. Input the desired stitch length as
9. Press .
Input the start point for a multiple stitch.
Input the number of lines for a multiple stitch raging from 2 to 99 in
Ex.) The number of line for a multiple stitch
Input the stitch length in
Press
.
5 lines
.
to input a split.
and press
.
.
Programmer
Chapter 3 Programming with Command Function
Input value
505
.
and press .
.
, and press
.
. Move
.
173